In Call voice commands (TeamViewer xAssist)
Usually you will let your remote expert control your headset once in a call
However you may want to make certain voice commands yourself, so here they are
Please make sure you are safe & not distracted from your task while issuing voice commands!!
To make communication as easy and effective as possible, Frontline Workplace offers a variety of functions that are available during calls. You can either activate or deactivate them via the user interface or you can use the voice commands listed below.
Note: The in-call options menu will be automatically hidden if no interaction takes place for five seconds. To bring the menu up again, press any physical navigation button on your device.
1.Ends the call after reconfirmation.
2.Mutes/unmutes the microphone.
3.Turns the video stream on/off.
4.Adjusts the sound volume up/down.
5.Takes an HD picture and sends it via the chat.
6.Captures the text of the current video stream and sends it both as an image and as text via the chat.
7.Turns the screen off. To turn it on again, press any physical navigation button on your device or say “Screen On”.
8.Turns the flashlight on/off (if the device has one).
In call Voice commands
Voice command | Action
Hang up call | Ends the current call.
Turn volume up | Turns the volume up.
Turn volume down | Turns the volume down.
Microphone on | Unmutes the microphone.
Microphone off | Mutes the microphone.
Screen off | Turns the screen off.
Screen on | Turns the screen on.
Video on | Turns the video stream on.
Video off | Turns the video stream off.
Flashlight on | Turns the flashlight on (if the device has one).
Flashlight off | Turns the flashlight off (if the device has one).
Take picture | Captures an HD picture.
Toggle USB camera | Switches to the external USB camera’s video stream (if available).
Scan text | Converts the text of the current video stream into a copyable form.
Noise-canceling on* | Turns noise cancellation on.
Noise-canceling off* | Turns noise cancellation off.
Only available for RealWear NAV-500/520
However you may want to make certain voice commands yourself, so here they are
Please make sure you are safe & not distracted from your task while issuing voice commands!!
To make communication as easy and effective as possible, Frontline Workplace offers a variety of functions that are available during calls. You can either activate or deactivate them via the user interface or you can use the voice commands listed below.
Note: The in-call options menu will be automatically hidden if no interaction takes place for five seconds. To bring the menu up again, press any physical navigation button on your device.
1.Ends the call after reconfirmation.
2.Mutes/unmutes the microphone.
3.Turns the video stream on/off.
4.Adjusts the sound volume up/down.
5.Takes an HD picture and sends it via the chat.
6.Captures the text of the current video stream and sends it both as an image and as text via the chat.
7.Turns the screen off. To turn it on again, press any physical navigation button on your device or say “Screen On”.
8.Turns the flashlight on/off (if the device has one).
In call Voice commands
Voice command | Action
Hang up call | Ends the current call.
Turn volume up | Turns the volume up.
Turn volume down | Turns the volume down.
Microphone on | Unmutes the microphone.
Microphone off | Mutes the microphone.
Screen off | Turns the screen off.
Screen on | Turns the screen on.
Video on | Turns the video stream on.
Video off | Turns the video stream off.
Flashlight on | Turns the flashlight on (if the device has one).
Flashlight off | Turns the flashlight off (if the device has one).
Take picture | Captures an HD picture.
Toggle USB camera | Switches to the external USB camera’s video stream (if available).
Scan text | Converts the text of the current video stream into a copyable form.
Noise-canceling on* | Turns noise cancellation on.
Noise-canceling off* | Turns noise cancellation off.
Only available for RealWear NAV-500/520
Updated on: 26/07/2023
Thank you!