Remove RealWear Navigator 500 Battery and Replace

RealWear Navigator ships with a rechargeable battery and requires the battery to power ON.

Remove the Battery
To remove the rechargeable battery, do the following:

Press the tab on the forward edge of the battery, next to the power button.
Pull the battery away from RealWear Navigator.

Replace the Battery
To replace the rechargeable battery, do the following:

Slide the battery into the battery compartment at a slight angle until the connections are seated and the battery is flush with the battery compartment.
Note: See the illustration below for the correct position of the battery before latching the battery into place.
Pull back on the battery tab and push the battery into place.
Release the battery tab to secure the battery in the battery compartment.

Updated on: 01/12/2022